Stock number |
Description
|
WD |
waldown bench drill press

Single phase 240 volt Waldown bench drill press. Morse taper 2, comes with a 1/2" capacity drill chuck. Excellent used (reconditioned) condition
|
Waldown x 4 |
waldown bench drills

4 off Waldown drills on a steel bench, morse taper 2 spindles, good condition.
|
Waldown x 5 |
waldown bench drills

5 off Waldown drills on a tubular steel bench, morse taper 2 spindles, 2 with air opteration, good condition.
|
Waldown x 3 |
waldown bench drills

3 off waldown drills on a steel bench, morse taper 2 spindles, good condition.
|
trademaster |
Trademaster GH40HS pedistal drilling & tapping machine

This is an excellent condition pedestal drilling tapping machine. Morse taper 4 spindle, Spindle speeds 95 to 1600 RPM, table size 540mm x 470mm
|
1991 |
Kerry radial arm drill

This radial arm drill has a maximum reach of 1.28m (distance from edge of the column to centre of the spindle). Morse taper 4 spindle. The radial arm drill maximum distance from the base of the drill to the spindle nose is approx 1400mm. This radial arm drill speed range is 110 to 1345 RPM. The feed rate available on the radial arm drill are as follows 0.004", 0.008" & 0.016 inches per rev. The base of the radial arm drill is 2.1m long x 810mm wide & the box table that comes with the radial arm drill is 890mm x 630mm x 520mm high. This Kerry radial arm drilling machine is in good condition.
|
|
Kao Ming radial arm drill

Kao Ming model KMR700 radial arm drill.
|
| 1784 |
Yoshida pedestal drill

16mm capacity chuck, belt drive, hydraulic lift table, in very good condition.
|
| 1878 |
Megatap II-G8 Thread tapping machine

Manufactured by Microtap, computerised high precision tapping machine, capacity M2.5 to M8 tool steel, M2.5 to M10 mild steel, M2.5 to M12 aluminium, uses DIN standard taps, includes 6 collets, manufactured 1996, excellent condition.
|
|
2 x Waldown 1/2" bench drills (3 phase)

Both Waldown drills have been reconditioned with 5 new bearings in the head & two new bearings in the motor. they has also been repainted. Top condition.
|
| 1726 |
Waldown 1/2" bench drill

3 phase brobo waldown bench drill, in very good condition.
|
|
Waldown twin spindle tapper/drill

Waldown twin spindle tapper/drill.
|
|
Arboga geared head drill

Arboga geared head drill.
|
| 1692 |
Waldown twin head tapping/drill

3 phase, in very good condition.
|
|
Parken geared head drill

Comes with collet chuck, see photo.
|
| 1769 |
Worner automatic drill/riveter/swaging machine

3 phase, in very good condition.
|
| 1375 |
Chen FWA drill/tap

4 head drilling & tapping machine, in very good condition.
|
| 1388 |
Sugino multi stepfeed drill

|
Newmac sells quality new and used lathes mills
CNC equipment threadrolls slotters grinders and associated machinery and tooling
for the manufacturing and education sectors.